Welcome to a work in progress

This blog is dedicated to the restoration and modification of a Glasflügel Standard Libelle H201B, and a tribute to those who have dared to do the same, and to those who are helping with seeing this dream take flight.

Thursday, December 12, 2013

Three weeks in!

Well, we are three weeks into the final work.

Robert and Joseph have been hard at work getting the winglets installed.

They encountered a few issues. My wings did not align to the drawings and required some creative engineering to get the winglets to properly fit.

Robert had Joseph take some videos that are humorously familiar to a scene in the film the Sunship Games.

I will add that video to the blog soon.

Joseph has been working on refinishing the wings between working on the winglets and the repairs.

I will be jumping in this weekend.


Thursday, December 5, 2013

The work continues this week

Since last weekend, and during the week, Joseph has been able to work on the left wing. The fairing is now blended into the wing, and now its time to fill any lows and level the area around the airbrake box.













The wing has slight low areas and the top surface is getting smooth.

But while he was working on the surface, I mentioned that the wing spar fork stubs need to be inspected.

Robert walked in just in time to take a look at it. There was some slight rust on the surface of the spar fork stub fitting. 

Robert referenced TN201-31 and found that the stub fittings will need to be inspected. Joseph removed the glass and Robert found that the fittings just needed to be cleaned up, chromite coated and then re-glassed.  That was good news, these did not need to be replaced.

The right wing still needs to be looked at.

Another winter storm has hit and bought a stop to the work since Joseph needs to drive through the pass to get to Moriarty. 

This weekend, we will need to see what Mother Nature still has to dish out!  

Monday, December 2, 2013

Some things never seem to change

I get the feeling that I'm cursed

Just when I think we have a plan, all hell breaks loose.

I was getting a feeling this weekend that this project was not going to get done as planned. Just like last year, I have found that my project at the airport will be put on the back burner for a spell.

The only time Joseph will be allowed to work on it is over the weekend since higher priority aircraft repairs are coming in now and the hanger will be soon again be filled with projects that will need to be finished before the next soaring season begins.

I hope it will not be sometime in March, (like last year) before things again slow down and my glider, like the groundhog emerges from the trailer to see the light of spring, and the hope of getting finished.


Like I said, cursed!

Saturday, November 30, 2013

Bound and Determined!

Joseph and I are as the topic title states; we are bound and determined to finish this plane by the end of the year. We have thirty days to do it in.

Joseph feels we have about 180 hours left. The only roadblock we discovered now is the spigot pins. Robert needs to inspect them. The is some corrosion and the glass around the mounts needs to be replaced. I just hope the pins don't need to be replaced.

The week before, Joseph put in 50 hours on repaing the delaminated seam on the fusalage spin and the final cleanup finishing on the fairings on the fuselage. They are crisp!









He also worked on the cleanup on the fuselage canopy tracks. Over the past week and a half, I cleaned up the resin squeeze out that was on the inside canopy frame. Joseph will be working on the final fit and fairing cleanup over this next week.






Today, we worked on the left wing. Joseph worked on the fairings, and we installed the new replacement aileron pushrod for the one that was corroded. I have finished glassing over the bolts in on the airbrakes.






 

With lights left on, the room is kept warm to allow the resin to cure overnite! 










Tomorrow, we start work on the left wing, filling, sanding the hopefully bob the wingtip for the winglets!



Sunday, November 3, 2013

One step foreward, two steps back - the Fuselage!

Howdy folks!
Here we are at it again! ... I'm getting tired of these dance steps.

While working on the Libelle fuselage, we noticed that the seam on the spine was starting to delaminate.

I cannot believe this crappy luck. Joseph noticed the hairline crack and pressed his thumb against it skin and the spine., with the sound of popping, the crack started to appear along the full length of the empennage. We dropped the Libelle off at Roberts to have him inspect the cracks.

Robert reported back to me stating that there was no chance of the fuselage separating, and the cracks can be easily repaired. Joseph was tasked in repairing the seam cracks today.

I have had enough with the delays and broken promises, and I'm reaching my breaking point and losing patience so I went to the bank to see if I can get some cash to finish this project once and for all!





Wednesday, October 23, 2013

Here we go again!

No, this is not an old photo. We are back on the project again, but doing what we can in my garage. With my wife still out of work, funds for the project are now little to none. Joseph wants to see this bird finished as much as I do, and will be coming over to the house on the weekends to get as much done as we can in the confined space.
Only time will tell....



Sunday, October 13, 2013

Moving On!

Here is a little more on the trailer saga.

Over the weekend, I managed to do some follow up on the final finishing on the trailer.

I noticed that the axel on one wheel was slightly toe out, and I might need to get the axel replaced. I will need to have the guys at the trailer shop take a look at it, but from what they stated, it was structurally sound.

Here is a bit of a closeup!
The final trim out on the electrical was completed, and the wiring bus turned out good.

I also added the cradle ramp anchor points.

Next weekend, we will paint the ramp to protect it from oxidizing.

The one internal part to add to wrap this up is the mount for the horizontal stabilizer. I have the material, I just now need to get it measured and fitted before anchoring it to the top.


Then we are off to the hanger with the glider!.

I hope soon!