Welcome to a work in progress

This blog is dedicated to the restoration and modification of a Glasfl├╝gel Standard Libelle H201B, and a tribute to those who have dared to do the same, and to those who are helping with seeing this dream take flight.

Wednesday, November 2, 2011

Belly Up!

The post title pretty much sums up what is happening here! And it will be a short one too!

Upon the recommendation from Robert, for it's lack of use, he suggested that I forgo the CG hook, and fill the CG hook opening.

I used fiberglass fabric sheets, cut to fit the hole from the inside and then a layer over the outside to feather it in.

With a little resin paste mixed with cotton flock, I filled in the holes and evened out the contour.

                                                      Finished and ready for inspection!

See, I told it would be a short post!

No comments:

Post a Comment